Laboratory Water Purification System BOECOpure Plus

admingfh — Thu, 24 Aug 2023 09:58:08 +0000

The all-rounder for H₂O pure type ASTM I + ASTM II

If both, pure and ultra pure water in small quantities is required, BOECOpure PLUS is the perfect system.
The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to a drinking water tap.

A press on the dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.

Features:

OptiFill dispenser is standard
TapWater set for direct connection to a drinking water tap
10-litre pure water tank has a pressure outlet
Tank volume display in percent
Simple and economical filter replacement
Leakage sensor is standard
Type ASTM I dispensing performance is 1,6 / 2 l/min.
Type ASTM II draw-off is up to 6 l/h / 12 l/h
Ready-to use, including filter cartridges
(Pre-treatment cartridge with RO membrane and ultrapure water cartridge)

The BOECOpure PLUS UV is supplemented with UV-oxidation, 185/254 nm.
The BOECOpure PLUS UV/UF is supplemented with an ultrafilter and UV-oxidation, 185/254 nm.

ASTM Type I Ultrapure water applicable for Molecular biology, microbiology, PCR, inorganic and organic trace analysis HPLC, ICP, TOC-analysis

ASTM Type II pure water applicable for Rinsing laboratory glassware, preparing and diluting buffers, reagents, tissue culture media and dyes.
Sample preparation for analytical methods such as flame AAS

Specification ASTM II:	Standard	UV	UV/UF
Pure water performance at 15°C:	6l/h	6 or 12 l/h	6 l/h
Conductivity:	0.067-0.1µS/cm
Resistance:	15-10 MO x cm
Pure water tank pressurized outlet	yes
Specification ASTM I	Standard	UV	UV/UF
Conductivity:	0.055 µS/cm
Resistance:	18.2 MO x cm
Bacterial ** content:	5-10 ppb	1-5 ppb	1-5 ppb
Dispensing performance:	up to 2 l/min	up to 2 l/min	up to 1.6 l/min
Bacterial ** content:	< 1 CFU/ml
Particles ** content:	< 1ml
Endotoxines*	0.001 EU/ml

Feedwater requirements
Drinking water acc. to DIN 2000 Feedwater temperature:	+ 2°C up to + 35°C
Manganese and iron content:	< 0,05 mg/l
Free chlorine content:	< 1 mg/l
Silt density index (SDI):	max. 3

Technical data
Operating pressure in bar, min./max.	0,5-6 bar
Supply voltage:	100-240 V / 50-60 Hz
Connected load:	0.1 kW
Connector size:	8 mm hose
Ambient temperature:	+ 2°C up to + 35°C
Dimensions ***, W x D x H:	390 x 725 x 615 mm
Weight:	20/21 kg

* in dependence on the feedwater quality
** with sterilizing filter 0,2 µm
*** with OptiFill Dispenser

Code	Description
BOE 8210051	BOECOpure PLUS Standard, 6 l/h – Typical application: AAS, IC, ICP, buffers and media preparation
BOE 8210052	BOECOpure PLUS UV, 6 l/h
BOE 8210102	BOECOpure PLUS UV, 12 l/h Typical application: Ultra-trace analysis, ICP-MS, HPLC, TOC
BOE 8210053	BOECOpure UF/UV Typical application: Life science and microbiology, cell culture media

The post Laboratory Water Purification System BOECOpure Plus appeared first on Laboratory Supplies Company (Pty) Ltd.

Water Purification | Laboratory Supplies Company (Pty) Ltd

Laboratory Water Purification System BOECOpure Plus