High Temperature Furnaces | Laboratory Supplies Company (Pty) Ltd https://www.labsupply.co.za/product-category/furnaces/high-temperature-furnaces/ Thu, 15 Feb 2024 13:52:48 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.labsupply.co.za/wp-content/uploads/2022/06/lab-supply-logo-100x100.png High Temperature Furnaces | Laboratory Supplies Company (Pty) Ltd https://www.labsupply.co.za/product-category/furnaces/high-temperature-furnaces/ 32 32 High-Temperature Furnaces with Molybdenum Disilicide Heating Elements and Refractory Brick Insulation up to 1700 °C https://www.labsupply.co.za/shop/furnaces/high-temperature-furnaces/high-temperature-furnaces-with-molybdenum-disilicide-heating-elements-and-refractory-brick-insulation-up-to-1700-c/ Thu, 15 Feb 2024 13:52:46 +0000 https://www.labsupply.co.za/?post_type=product&p=19188

Robust refractory brick insulation and special backing insulation.

High-temperature furnaces HFL 16/16 - HFL 160/17 have a sturdy cladding made from refractory insulation. This design offers better protection if the process produces aggressive gases or acids, such as when glass is melted.

  • Like high-temperature furnaces HT, except:
  • Tmax 1600 °C or 1700 °C
  • Robust refractory brick insulation and special backing insulation
  • Furnace floor made of lightweight refractory bricks accommodates higher charge weights
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

The post High-Temperature Furnaces with Molybdenum Disilicide Heating Elements and Refractory Brick Insulation up to 1700 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> High-temperature furnaces HFL 16/16 – HFL 160/17 have a sturdy cladding made from refractory insulation. This design offers better protection if the process produces aggressive gases or acids, such as when glass is melted.

  • Like high-temperature furnaces HT, except:
  • Tmax 1600 °C or 1700 °C
  • Robust refractory brick insulation and special backing insulation
  • Furnace floor made of lightweight refractory bricks accommodates higher charge weights
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Specification

Model Tmax Inner dimensions in mm Volume Outer dimensions1 in mm Connected Electrical Weight
in °C w d h in l W D H load in kW connection in kg
HFL 16/16 1600 200 300 260 16 1010 890 1990 12.5 3-phase2 530
HFL 40/16 1600 300 350 350 40 1140 940 2260 12.5 3-phase 735
HFL 64/16 1600 400 400 400 64 1240 990 2310 18.5 3-phase 910
HFL 160/16 1600 500 550 550 160 1410 1240 2490 21.5 3-phase 1290
HFL 16/17 1700 200 300 260 16 1010 890 1990 12.5 3-phase2 530
HFL 40/17 1700 300 350 350 40 1140 940 2260 12.5 3-phase 735
HFL 64/17 1700 400 400 400 64 1240 990 2310 18.5 3-phase 910
HFL 160/17 1700 500 550 550 160 1410 1240 2490 21.5 3-phase 1290
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Heating only between two phases

The post High-Temperature Furnaces with Molybdenum Disilicide Heating Elements and Refractory Brick Insulation up to 1700 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> High-Temperature Furnaces with SiC Rod Heating and Fiber Insulation up to 1550 °C https://www.labsupply.co.za/shop/furnaces/high-temperature-furnaces/high-temperature-furnaces-with-sic-rod-heating-and-fiber-insulation-up-to-1550-c/ Thu, 15 Feb 2024 13:49:43 +0000 https://www.labsupply.co.za/?post_type=product&p=19182 Heating from both sides via vertically mounted SiC rods.

The high-temperature furnaces HTC 16/16 - HTC 450/16 are heated by vertically hung SiC rods, which makes them especially suitable for sintering processes up to a maximum operating temperature of 1500 °C. For some processes, e. g. for sintering zirconium oxide, the reduction of interactivity between the charge and the SiC rods, these models are more suitable than the alternatives heated with molybdenum disilicide elements. The basic construction of these furnaces make them comparable with the already familiar models in the HT product line and they can be upgraded with the same additional equipment.

The post High-Temperature Furnaces with SiC Rod Heating and Fiber Insulation up to 1550 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> The high-temperature furnaces HTC 16/16 – HTC 450/16 are heated by vertically hung SiC rods, which makes them especially suitable for sintering processes up to a maximum operating temperature of 1500 °C. For some processes, e. g. for sintering zirconium oxide, the reduction of interactivity between the charge and the SiC rods, these models are more suitable than the alternatives heated with molybdenum disilicide elements. The basic construction of these furnaces make them comparable with the already familiar models in the HT product line and they can be upgraded with the same additional equipment.

  • Tmax 1550  °C
  • Recommended maximum working temperature approx. 50 °C below Tmax of the furnace. Higher working temperatures will increase wear and tear.
  • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
  • Heating from both sides via vertically mounted SiC rods
  • High-quality fiber insulation backed by special insulation
  • Long-life roof insulation with special suspension
  • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
  • Temperature uniformity at 1450 °C up to +/− 10 °C according to DIN 17052-1
  • Chain-guided parallel swivel door for defined opening and closing of the door without destroying the insulation
  • Two-door design (front/back) for high-temperature furnaces > HTC 276/..
  • Labyrinth sealing ensures the least possible temperature loss in the door area
  • Reinforced floor as protection for fiber insulation and to load heavy weights
  • Vapor vent in the furnace roof with motorized exhaust air flaps
  • Stainless steel exhaust hood as interface to customer’s exhaust system
  • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
  • Controller with touch operation P570 (50 programs with each 40 segments)

Specification

Model Tmax Inner dimensions in mm Volume Outer dimensions1 in mm Heating Power Connected Electrical Weight
in°C w d h in l W D H in kW load in kW connection in kg
HTC 16/16 1550 200 300 260 16 820 690 1860 12.0 16,5 3-phase2 220
HTC 40/16 1550 300 350 350 40 1010 800 1990 12.0 16,5 3-phase 420
HTC 64/16 1550 400 400 400 64 1140 890 2040 18.0 41,5 3-phase 660
HTC 128/16 1550 400 800 400 128 1140 1280 2040 26.0 61,0 3-phase 550
HTC 160/16 1550 500 550 550 160 1250 1040 2260 21.0 40,0 3-phase 535
HTC 276/16 1550 500 1000 550 276 1340 1600 2290 36.0 73,0 3-phase 1300
HTC 450/16 1550 500 1150 780 450 1380 1820 2570 64.0 118,0 3-phase 1450
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Heating only between two phases

The post High-Temperature Furnaces with SiC Rod Heating and Fiber Insulation up to 1550 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> High-Temperature Furnaces with Molybdenum Disilicide Heating Elements with Fiber Insulation up to 1800 °C https://www.labsupply.co.za/shop/furnaces/high-temperature-furnaces/high-temperature-furnaces-with-molybdenum-disilicide-heating-elements-with-fiber-insulation-up-to-1800-c/ Thu, 15 Feb 2024 13:46:35 +0000 https://www.labsupply.co.za/?post_type=product&p=19175 Oustanding temperature uniformity and practical details set very high quality benchmarks.

Due to their solid construction and compact stand-alone design, these high-temperature furnaces are perfect for processes in the laboratory where the highest precision is needed. Oustanding temperature uniformity and practical details set unbeatable quality benchmarks. For configuration for your processes, these furnaces can be extended with extras from our extensive option list.

The post High-Temperature Furnaces with Molybdenum Disilicide Heating Elements with Fiber Insulation up to 1800 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> Due to their solid construction and compact stand-alone design, these high-temperature furnaces are perfect for processes in the laboratory where the highest precision is needed. Oustanding temperature uniformity and practical details set unbeatable quality benchmarks. For configuration for your processes, these furnaces can be extended with extras from our extensive option list.

  • Tmax 1600 °C, 1750 °C, or 1800 °C
  • Recommended working temperature 1750 °C (for models HT ../18), increased wear and tear must be expected in case of working at higher temperatures
  • Dual shell housing with fan cooling for low shell temperatures
  • Heating from both sides via molybdenum disilicide heating elements
  • High-quality fiber insulation backed by special insulation
  • Side insulation constructed with tongue and groove blocks provides for low heat loss to the outside
  • Long-life roof insulation with special suspension
  • Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
  • Chain-guided parallel swivel door for defined opening and closing of the door
  • Two-door design (front/back) for high-temperature furnaces > HT 276/..
  • Labyrinth sealing ensures the least possible temperature loss in the door area
  • Reinforced floor as protection for bottom insulation as standard from models HT 16/16 upwards
  • Vapor vent in the furnace roof with motorized exhaust air flaps
  • Heating elements switched via thyristors
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Specifications

Model Tmax Inner dimensions in mm Volume Outer dimensions1 in mm Connected Electrical Weight
°C w d h in l W D H load kW connection in kg
HT 08/16 1600 150 300 150 8 740 640 1755 8.5 3-phase2 215
HT 16/16 1600 200 300 260 16 820 690 1860 12.5 3-phase2 300
HT 29/16 1600 275 300 350 29 985 740 1990 9.8 3-phase2 350
HT 40/16 1600 300 350 350 40 1010 800 1990 12.5 3-phase 420
HT 64/16 1600 400 400 400 64 1140 890 2040 18.5 3-phase 555
HT 128/16 1600 400 800 400 128 1140 1280 2040 26.5 3-phase 820
HT 160/16 1600 500 550 550 160 1250 1040 2260 21.5 3-phase 760
HT 276/16 1600 500 1000 550 276 1340 1600 2290 36.5 3-phase 1270
HT 450/16 1600 500 1150 780 450 1360 1820 2570 65.0 3-phase 1570
HT 08/17 1750 150 300 150 8 740 640 1755 8.5 3-phase2 215
HT 16/17 1750 200 300 260 16 820 690 1860 12.5 3-phase2 300
HT 29/17 1750 275 300 350 29 985 740 1990 9.8 3-phase2 350
HT 40/17 1750 300 350 350 40 1010 800 1990 12.5 3-phase 420
HT 64/17 1750 400 400 400 64 1140 890 2040 18.5 3-phase 555
HT 128/17 1750 400 800 400 128 1140 1280 2040 26.5 3-phase 820
HT 160/17 1750 500 550 550 160 1250 1040 2260 21.5 3-phase 760
HT 276/17 1750 500 1000 550 276 1340 1600 2290 36.5 3-phase 1270
HT 450/17 1750 500 1150 780 450 1360 1820 2570 65.0 3-phase 1570
HT 08/18 1800 150 300 150 8 740 640 1755 8.5 3-phase2 215
HT 16/18 1800 200 300 260 16 820 690 1860 12.5 3-phase2 300
HT 29/18 1800 275 300 350 29 985 740 1990 9.8 3-phase2 350
HT 40/18 1800 300 350 350 40 1010 800 1990 12.5 3-phase 420
HT 64/18 1800 400 400 400 64 1140 890 2040 18.5 3-phase 555
HT 128/18 1800 400 800 400 128 1140 1280 2040 26.5 3-phase 820
HT 160/18 1800 500 550 550 160 1250 1040 2260 21.5 3-phase 760
HT 276/18 1800 500 1000 550 276 1340 1600 2290 36.5 3-phase 1270
HT 450/18 1800 500 1150 780 450 1360 1820 2570 65.0 3-phase 1570
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Heating only between two phases

The post High-Temperature Furnaces with Molybdenum Disilicide Heating Elements with Fiber Insulation up to 1800 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> High-Temperature Furnaces with Scale for Determination of Combustion Loss and Thermogravimetric Analysis (TGA) up to 1750 °C https://www.labsupply.co.za/shop/furnaces/high-temperature-furnaces/high-temperature-furnaces-with-scale-for-determination-of-combustion-loss-and-thermogravimetric-analysis-tga-up-to-1750-c/ Thu, 15 Feb 2024 13:43:03 +0000 https://www.labsupply.co.za/?post_type=product&p=19170 Delivery includes base, ceramic plunger with base plate in the furnace lining, precision scale and software package.

These high-temperature furnaces were specially developed to determine combustion loss during annealing and for thermogravimetric analysis (TGA) in the lab. The complete system consists of the high-temperature furnace for 1600 °C or 1750 °C, a table frame, precision scale with feedthroughs into the furnace and powerful software for recording both the temperature curve and the weight loss over time.

The post High-Temperature Furnaces with Scale for Determination of Combustion Loss and Thermogravimetric Analysis (TGA) up to 1750 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> These high-temperature furnaces were specially developed to determine combustion loss during annealing and for thermogravimetric analysis (TGA) in the lab. The complete system consists of the high-temperature furnace for 1600 °C or 1750 °C, a table frame, precision scale with feedthroughs into the furnace and powerful software for recording both the temperature curve and the weight loss over time.

Standard Equipment

  • Defined application within the constraints of the operating instructions
  • Tmax 1600 °C or 1750 °C
  • High-quality molybdenum disilicide heating elements
  • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
  • Adjustable air inlet
  • Exhaust air opening in the roof
  • Type B thermocouple
  • Delivery includes base, ceramic plunger with base plate in the furnace lining, precision scale and software package
  • 4 scales available for different maximum weights and scaling ranges
  • Process control and documentation for temperature and combustion loss via VCD software package for monitoring, documentation and control

Specification

Model Tmax Inner dimensions in mm Volume Outer dimensions1 in mm Connected Electrical Weight Heating time
in °C w d h in l W D H load in kW connection* in kg in min2
LHT 04/16 SW 1600 150 150 150 4 655 370 890 5.0 3-phase3 85 25
LHT 04/17 SW 1750 150 150 150 4 655 370 890 5.0 3-phase3 85 30
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.*Please see page 75 for more information about supply voltage
2Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE)
3Heating only between two phases

 

Scale Readability Maximum weighing range Weight of plunger Calibration value Minimum load
type in g in g in g in g in g
EW-2200 0.01 2200 incl. plunger 850 0.1 0.5
EW-4200 0.01 4200 incl. plunger 850 0.1 0.5
EW-6200 0.01 6200 incl. plunger 850 – 1.0
EW-12000 0.10 12000 incl. plunger 850 1.0 5.0

The post High-Temperature Furnaces with Scale for Determination of Combustion Loss and Thermogravimetric Analysis (TGA) up to 1750 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> High-Temperature Bottom Loading Furnaces up to 1650 °C https://www.labsupply.co.za/shop/furnaces/high-temperature-furnaces/high-temperature-bottom-loading-furnaces-up-to-1650-c/ Thu, 15 Feb 2024 13:39:38 +0000 https://www.labsupply.co.za/?post_type=product&p=19164

High-quality heating elements made of molybdenum disilicide offer very good protection against chemical interaction between charge and heating elements.

The motorized lifting table significantly simplifies the charging of the high-temperature furnaces LHT ../.. LB (Speed). The heating all around the cylindrical furnace chamber provides for an optimal temperature uniformity. For the tabletop models LHT 01/17 LB Speed and LHT 02/17 LB Speed the charge can be placed in charge saggars made of technical ceramics. Up to three charge saggars can be stacked on top of each other resulting in a high productivity.

The post High-Temperature Bottom Loading Furnaces up to 1650 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> The motorized lifting table significantly simplifies the charging of the high-temperature furnaces LHT ../.. LB (Speed). The heating all around the cylindrical furnace chamber provides for an optimal temperature uniformity. For the tabletop models LHT 01/17 LB Speed and LHT 02/17 LB Speed the charge can be placed in charge saggars made of technical ceramics. Up to three charge saggars can be stacked on top of each other resulting in a high productivity.

Standard Equipment

  • Tmax 1650 °C
  • High-quality heating elements made of molybdenum disilicide offer very good protection against chemical interaction between charge and heating elements
  • Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
  • Excellent temperature uniformity thanks to three (LHT 02/17 LB Speed) or four-sided (LHT 01/17 LB Speed) heating of the furnace chamber
  • Furnace chamber with a volume of 1 or 2 liters, table with large floor space
  • Precise, motorized toothed belt drive of the table with button operation
  • Exhaust air vent in the roof
  • Type S thermocouple
  • Controller P580 (50 programs with each 40 segments)
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Specification

Model Tmax Work space dimensions2 in mm Charging area in mm Volume Outer dimensions1 in mm Connected Electrical Weight
in °C w d h w d in l W D H load in kW connection in kg
LHT 01/17 LB Speed 1650 75 110 60 95 130 1 350 590 695 2.9 1-phase 45
LHT 02/17 LB Speed 1650 Ø 115 140 135 135 2 390 590 785 3.3 1-phase 55
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Corresponds to charge saggars with spacer

The post High-Temperature Bottom Loading Furnaces up to 1650 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> High-Temperature Furnaces with MoSi₂ Heating Elements up to 1800 °C https://www.labsupply.co.za/shop/furnaces/high-temperature-furnaces/high-temperature-furnaces-with-mosi%e2%82%82-heating-elements-up-to-1800-c/ Thu, 15 Feb 2024 13:34:35 +0000 https://www.labsupply.co.za/?post_type=product&p=19159 The first-class workmanship using high-quality materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory.

Designed as tabletop models, these compact high-temperature furnaces have a variety of advantages. The first-class workmanship using high-quality materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory. These high-temperature furnaces are also perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges.

The post High-Temperature Furnaces with MoSi₂ Heating Elements up to 1800 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> Designed as tabletop models, these compact high-temperature furnaces have a variety of advantages. The first-class workmanship using high-quality materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory. These high-temperature furnaces are also perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges.

Standard Equipment

  • Tmax 1600 °C, 1750 °C, or 1800 °C
  • Recommended working temperature 1750 °C (for models LHT ../18), increased wear and tear must be expected in case of working at higher temperatures
  • High-quality molybdenum disilicide heating elements
  • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
  • Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
  • Adjustable air inlet opening, exhaust air opening in the roof
  • Type B thermocouple
  • Controller P570 (50 programs with each 40 segments)
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Specification

Model Tmax Inner dimensions in mm Volume Outer dimensions1 in mm Connected Electrical Weight Heating time
in °C w d h in l W D H2 load in kW connection* in kg in min3
LHT 02/16 1600 90 150 150 2 470 630 760+260 3.0 1-phase 75 30
LHT 04/16 1600 150 150 150 4 470 630 760+260 5.2 3-phase4 85 25
LHT 08/16 1600 150 300 150 8 470 810 760+260 8.0 3-phase4 100 25
LHT 01/17 D 1650 110 120 120 1 385 425 525+195 2.9 1-phase 28 35
LHT 03/17 D 1650 135 155 200 4 470 630 770+260 3.0 1-phase 75 30
LHT 02/17 1750 90 150 150 2 470 630 760+260 3.0 1-phase 75 35
LHT 04/17 1750 150 150 150 4 470 630 760+260 5.2 3-phase4 85 30
LHT 08/17 1750 150 300 150 8 470 810 760+260 8.0 3-phase4 100 30
LHT 02/18 1800 90 150 150 2 470 630 760+260 3.6 1-phase 75 60
LHT 04/18 1800 150 150 150 4 470 630 760+260 5.2 3-phase4 85 40
LHT 08/18 1800 150 300 150 8 470 810 760+260 9.0 3-phase4 100 40
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.*Please see page 75 for more information about supply voltage
2Including opened lift door4Heating only between two phases
3Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE)

The post High-Temperature Furnaces with MoSi₂ Heating Elements up to 1800 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> High-Temperature Furnaces with SiC Rod Heating up to 1600 °C https://www.labsupply.co.za/shop/furnaces/high-temperature-furnaces/high-temperature-furnaces-with-sic-rod-heating-up-to-1600-c/ Thu, 15 Feb 2024 13:30:45 +0000 https://www.labsupply.co.za/?post_type=product&p=19153 Heating times of 25 - 30 minutes can be achieved, depending on the furnace model and the conditions of use. These powerful laboratory muffle furnaces are available for temperatures up to 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of 25 - 30 minutes can be achieved, depending on the furnace model and the conditions of use.

The post High-Temperature Furnaces with SiC Rod Heating up to 1600 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]> These powerful laboratory muffle furnaces are available for temperatures up to 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of 25 – 30 minutes can be achieved, depending on the furnace model and the conditions of use.

Standard Equipment

  • Tmax 1550 °C or 1600 °C
  • Working temperature 1500 °C, increased wear and tear must be expected in case of working at higher temperatures
  • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
  • Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
  • Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (High-temperature furnace LHTCT 01/16 only with lift door)
  • Switching system with solid-state-relays, power tuned to the SiC rods
  • Easy replacement of heating rods
  • Adjustable air inlet opening, exhaust air opening in the roof
  • Controller C550 (10 programs with each 20 segments)
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Specification

Model Tmax Inner dimensions in mm Volume Outer dimensions1 in mm Connected Electrical Weight Heating time
in °C w d h in l W D H2 load in kW connection* in kg in min3
LHTCT 01/16 1550 110 120 120 1.5 340 300 460 3.5 1-phase 18 30
LHTC(T) 03/16 1600 120 210 120 3.0 415 545 490 10.0 3-phase4 30 30
LHTC(T) 08/16 1600 170 290 170 8.0 490 625 540 15.5 3-phase 40 25
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.*Please see page 75 for more information about supply voltage
2Plus maximum 240 mm for models LHTCT when open
3Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE)
4Heating only between two phases

The post High-Temperature Furnaces with SiC Rod Heating up to 1600 °C appeared first on Laboratory Supplies Company (Pty) Ltd.

]]>